Blog

Home»Blog
Blog2020-06-30T18:55:48+00:00
1709, 2020

Ghost in the Machine

By |September 17th, 2020|Blog|

Sometimes equipment does not work the way you expect it to. Sometimes you follow all the instructions, you set up a machine in a way it is supposed to or has worked many times, and you get - something else. You get a problem, unexpected results, something weird. Perhaps influenced [...]

1911, 2019

Addressing Water Scarcity

By |November 19th, 2019|Blog|

The AAAS (American Association for the Advancement of Science) recently put together a webinar presentation entitled: Water in a Dry Land: Can Innovation Drive Water Security? It was originally aired: Wednesday, 13 November 2019.   The participants were mostly from the Middle East, a Region that poses a nightmare in [...]

906, 2016

APEX Pump: Not a “Lightweight” Solution

By |June 9th, 2016|APEX, Blog, Pumps|

Watson Marlow recently released new sizes of the APEX pumps. We met for training last week, and the reports of performance in the field have exceeded expectations. Originally, the pump was being brought out to help Bredel compete with low cost (and low quality) hose pump competitors. For some reason, [...]

1502, 2015

MasoSine Pump: The Niche You May Need

By |February 15th, 2015|Blog, Pumps|

This is not your standard run-of-the-mill pump.  This is unique. An internal rotating sinusoidal rotor with a scrapergate that goes back and forth to direct the flow is about as simple as the concept gets.  But it's simplicity is deceptive. If you pull the rotor out and run it across [...]

2801, 2014

Exchanger Value: Welcome to Enerquip

By |January 28th, 2014|Blog, Enerquip|

Why suffer from the ongoing struggle between wanting something good, something of high quality, something that will last - and having to pay too much for it?   The solution is Enerquip Shell & Tube Heat Exchangers.  See: http://www.enerquip.com/   Based in the heart of the Wisconsin Dairy Industry Stainless [...]

1501, 2014

Shepherds versus Trolls

By |January 15th, 2014|Blog|

I've spent a lot time trying to answer the question "What does a Manufacturer's Representative do?"   It's been my job for the last 19 years, so it's something I should be able to do, answer people when they ask “what do you do?”  My answer is more than just [...]

212, 2013

What’s in Your Wastewater?

By |December 2nd, 2013|Blog, Water Treatment|

One of the most exciting things we have been working on at Summit Equipment is turning trash into treasure with SmartFlow Technologies.   See: http://www.smartflow-tech.com/   Our technology, with it's high throughput and high flow crossflow membrane modules at its core, is capable of micro-, ultra-, and nano- filtration of [...]